Sliding Patio Doors Repair
It is possible for sliding patio doors to be difficult to open and close. This could be due to a number of issues, including dirty tracks or improperly aligned rollers.
Start by cleaning and lubricating your rollers. You can also re-align the rollers using the adjustment holes located on the bottom of the door panel that can be moved.
Tracks that are damaged or dirty
A damaged or dirty track can cause the door to not move properly. Over time dirt and grit, as well as corrosion can form blocking the track from moving smoothly. The solution is a thorough cleaning with an abrasive and mild detergent. It is recommended to complete this task on a regular basis to ensure the smooth operation of your door, and to avoid the need for costly repairs later on.
A leaking door can also be a common problem. It requires immediate attention in order to avoid structural deterioration, water damage and mold growth. The problem is usually caused by worn weather stripping and a misaligned door. This can be rectified by replacing the weather stripping and aligning the doors.
Rollers that jump off the track are a common issue that can be fixed with some simple DIY work. Get a partner to assist you with this job as the door could be heavy. To move the rollers around in the house, you must stand and lean one of the panels toward you. To stop the panel from falling, place it on sawhorses after it has been lifted off the bottom track. Then, loosen sliding patio door repair of the roller's screws and then pry them out with the help of a screwdriver. Then, you can clean any dirt that has accumulated between the wheel and tracks. You can then clean each wheel using denatured alcohol and a rag, then reposition the wheels and reattach them to their tracks.
It may be possible to straighten bent track sections with a mallet made of rubber and a piece of wood. However, if the bent section is near the hinges and has the potential to cause more damage, you'll be better off calling a professional to ensure safety.
Rollers that are misaligned
If your sliding door isn't moving as it should it's most likely due to the roller wheels are not aligned with the track. The wheels may be dirty or rusted, and their bearings are worn down. This creates friction between the floor of the door and the track, causing it to grind or snag when it's shut or opened. It also makes noises that sound like squeaking.
Fortunately it's a simple fix. You don't have to remove the door to get at the wheels since they are located on a bracket which is adjustable. Find the adjustment holes (usually on either side of the frame) and use a screwdriver to rotate the screws that control the wheels. Rotating the screw clockwise will raise the wheel while rotating it counterclockwise will lower it. Continue to adjust the door until it is open and shuts smoothly.
It is essential to adjust the wheels prior to adjusting the latch. For the lock to function correctly, the latch hooks must be aligned with the strike plate. If you don't, the latch could open or close while you're away from the room.
Sliding patio doors are an investment, and ensuring they are functioning correctly helps keep your family safe and secure. By addressing common issues like faulty tracks, rollers and handles, you can avoid costly repairs in the near future. For assistance with your patio doors, call our team. We will assess your needs for repair of your sliding patio door and assist you in keeping it in good condition. Our experts can also assist with any replacement parts you may need.
The door frame is damaged or damaged
Sliding patio doors are a wonderful addition to any home. They offer a stylish and practical alternative to swing-open or hinged doors for patios. However, like other hardware doors, they can experience various issues in time. Fortunately, most of these issues are simple to fix using a bit of DIY know-how.
A common issue with sliding patio doors is a gap in the frame. This could be due to a number factors, including tracks or rollers that are not aligned properly, a damaged door or track or a bent frame. In most cases the root of the issue is easily remedied by taking the door off and reattaching the track or rolling elements. This should be done with care to not cause damage to the track or frame.
In certain instances it is necessary to replace the entire track. This can be done easily with an universal replacement kit that is readily available at major hardware stores. These kits are simple to install and will have your door operating perfectly in no time.
It is essential to regularly inspect the frame of your sliding door and hardware for signs of wear and tear, like loose screws or bolts. This is an easy and efficient DIY patio maintenance procedure that is done using an electric screwdriver. In addition, it is essential to grease your rollers and tracks to facilitate smooth operation and prevent premature wear.
Patio doors are typically the primary entry point to the backyard and outdoor living area for a majority of homeowners. In order to maintain peace and security within the home, it's essential that they function correctly. By following these simple DIY maintenance tips, homeowners can prolong the life of their sliding patio door and cut down on costly repairs or replacements.
Handle is not working properly
Sliding patio doors are a great way to access your backyard and also enter your home, however they can be difficult to operate if they become misaligned or damaged. A damaged handle could cause the door to not shut or open properly. Repairing a damaged handle can be accomplished at home.
In most cases the loose grip is the result of screws that have slipped out of the backplate. To fix the problem, tighten the screws on the inside handle with the help of a screwdriver. If you notice that the handle is loose, it may be an indication that the threads have worn and will need to be replaced.
A broken latch could also be the reason. It is more likely that the latch will break if it is made of metal, rather than plastic. You can try applying lubrication to the latch in case it isn't engaging or turning. If this does not work, you may need to replace the lock.
In the end, the handle may become difficult to operate if it is broken or cracked. If this is the case it is essential to replace it with a brand new handle that is in line with the design of your sliding patio door.
Feldco can help you restore your patio doors to their former splendor, no matter if they are brand new or old and outdated. We have high-quality doors available in various sizes and styles that can be installed to match your home perfectly. Contact us today for more about our products! We provide services to Southern California homeowners, including Ventura County and Orange County.
Afflicted Weatherstripping
It's time to upgrade your weather stripping if see light around closed doors and windows, or sense a draft pulsing towards the door or window. These strips create an airtight seal, which stops unwanted water, air, and pests from entering the home. This keeps your conditioned and heated air inside, saving you money on energy bills.
Depending on the condition of your weather stripping, it may have deflated and lost its buoyant, positive seal. This is easy to diagnose by taking a dollar bill and putting it through the seal on top of the door frame and at the bottom of the door jamb where the two meet. If the dollar bill slides easily between the seal and the door then it's time to replace the weather stripping.
It's tempting to cut out only the worn portion of weather stripping to replace it, but this could leave cracks on each side of the new stripping and may cause problems with the seal in the future. It's more efficient to replace the entire stripping, so that you can rest assured knowing your door is properly sealed again.
Follow our DIY guide for weather stripping and install the correct material on your sliding patio door and frame, to ensure a tight, lasting seal. This is a great method to save money on your energy bills and repair your sliding patio door. Don't wait until its too late. Your wallet and home will be grateful.